Welding Consumables

Flux cored welding wires are designed, formulated and manufactured in Aliaj Joosh manufacturing facilities to address widest requirement for cladding and hardfacing applications. It is known as one of the largest and most advanced flux cored welding wire manufacturing facilities in the region which certified by third party bodies and assured by very restrict quality schemes.

Continuous research and development with an industry focused especially in hardfacing and weld-overlay cladding applications enable us to design and manufacture customised flux cored welding wires for mostly repair and maintenance applications.

Our reliable raw material resources and dedicated material science and metallurgy engineers in our R&D team ensure the highest quality products in the market.

Our products categorise as:

Tool Steels
Martensitic and Ferritic Stainless Steel
Abrasion resistant alloys
Low and medium alloys
Work-hardenable alloys

Tool Steels

Metal Spray

Anti Abrasion Alloys

Low Alloy Steels

Martensitic Stainless Steels

Work Hardening Alloys

These alloys are designed to produce an austenitic matrix containing high amounts of manganese and nitrogen. The combination of these additions produces a rapid work-hardening rate and high work-hardening capacity. Some grades contain chromium and nickel to offer higher strength and better impact properties.

Martensitic Stainless Steels

These alloys contain chromium, varying from 9% to 16% with carbon levels ranging from 0.03% to 0.5%. The microstructure is mostly martensitic with small amounts of delta ferrite and retained austenite, depending on the overall chemistry and welding conditions. The filler materials are designed for various applications and the properties are enhanced by additions of nickel, molybdenum, vanadium, tungsten, cobalt and other grain refining elements.

Tool Steels

Tool steel filler materials are designed to possess excellent mechanical properties at elevated temperatures. While low alloy grades are easily machinable and can be used for buffering, chromium-molybdenum medium carbon containing alloys are used in severe pressure conditions at high temperatures. More complex tungsten and vanadium containing alloys are preferred in cutting tools where the number of layers are restricted to one or two.

Low Alloy Steels

These materials are used in various applications where mostly a combination of high strength and high toughness is required. The wear resistance is improved at the expense of ductility by the increased amount of chromium and carbon.

Anti Abrasion Alloys

A vast range of alloys can be classified into several groups based on their carbide forming constituents:

Alloys containing primary chromium carbides with varying Cr/C ratios in an austenitic or martensitic matrix
Alloys with primary titanium or niobium carbides
Materials with complex carbides
Boron containing materials for severe abrasion conditions.

Metal Spray

Arc Spray wires are designed and manufactured with specific sizes of metal particles to achieve high recovery and a stable arc spray process. All powders melt within +/- 50 degrees celsius. Powders are mixed in an inert atmosphere using purpose-designed mixers to achieve a homogeneous and purified mix.